Laminates, Louvres & Panels — Kolkata
Decorative laminates for shutters and furniture, plus bamboo-fibre and HDHMR composite louvres, fluted panels, tongue-and-groove wall panels and skirting — stocked, supplied and installed across Kolkata and eastern India.
01 — Laminates
A mineral composite sheet, a bendable soft-touch polymer, and the full 464-design decorative laminate catalogue. Every one is stocked or indented by us, and comes with a physical sample before you commit.
Mineral composite sheet with an anti-finger, feather-touch face — each colour pressed in three or four textures (plain, weave, check, leather) so one tone runs from a flat shutter face to a woven feature panel.
A bendable, anti-scratch polymer laminate with a soft-touch matt face — wraps a 180° return over ply or MDF without cracking, so no edge-banding strip is needed.
The full-range decorative laminate book — solids, woodgrains, stone and synchronised embossed faces across twelve collections, so almost any brief lands somewhere in the book.
02 — Louvres & Panels
Bamboo-fibre and HDHMR composite — louvres, fluted panels, tongue-and-groove wall panels and skirting. Every one is stocked or indented by us, and comes with a physical sample before you commit.
Bamboo-fibre composite louvres in a muted architectural palette — charcoal, slate, olive and clay. Four flute depths plus a flat mineral composite sheet, so a whole room wraps in one colour family.
A textured, plaster-and-stone reading of the same system — the L-8 louvre in soft leather grain, paired with a trowelled-concrete mineral composite sheet to break a wall into fluted and flat planes.
Slatted louvre panels that let a space breathe — a deep, evenly pitched groove in warm oak, teak and weathered-grey tones for full-height feature walls, ceilings and partition screens.
Interior louvre panelling in three ready-made sections — square rib, rounded flute and peaked rib — every rib identical down a 2.9 m length, going up on adhesive rather than a batten frame.
A tighter, shallower reed than Woodvents — closer to traditional beadboard, but in a composite that will not swell or split. Ten timber decors from pale ash to smoked walnut.
A moulded skirting profile in bamboo-fibre composite — 95 mm high with a classical stepped top edge. Thirty-one finishes, seven timber decors and twenty-four solids, for a skirting that reads as trim rather than an afterthought.
Grooved and fluted HDHMR wall panels, tongue-and-groove jointed, in nine profiles and eighteen German and Italian foil-laminate or veneer finishes. Full 3000 mm height, no horizontal joint floor to ceiling.
03 — Our Work
Room settings from the HDHMR Designer Panels catalogue — dining rooms, lobbies, bedrooms and lounges. Different brief, different profile, same range across the room.
Home Theatre — HDHMR Designer Panels
Lift Lobby — HDHMR Designer Panels
Bedroom Suite — HDHMR Designer Panels
Cafe Counter — HDHMR Designer Panels
Kitchen & Dining — HDHMR Designer Panels
Children's Room — HDHMR Designer Panels
04 — How It Runs
Area, room type and the profile you have in mind — fluted, ribbed, grooved or flat panel.
Physical swatches within 24 hours in Kolkata, couriered elsewhere in the east.
Panel layout, framework and wastage — priced as one line, not surprises.
Ex-stock from our Kolkata warehouse, or indented against your programme dates.
Our trained applicators, so material and workmanship sit with one party.
05 — Straight Answers
All seven ranges (Snazzy, Trendy, Woodvents, Groove in Wood, Elemet, Cressida, HDHMR) are water and termite resistant, so they hold up in kitchens, wash areas and covered balconies. They're not a facade-grade product for fully exposed exterior walls — for open-air facades and boundary screens, ask us about the aluminium and WPC options on our cladding range.
Super Matt is a bendable polymer laminate in 24 solid colours, built for shutter edges and 180° wraps where a joint would otherwise show. Surface Matters is the full decorative book — 464 designs across woodgrains, stone and solids — for everything that isn't a curved or wrapped edge.
Yes — a matching 25 mm edge band is available for every finish. Super Matt is the one range in this book that doesn't need banding, since the polymer itself wraps a 180° return.
Both are reeded L-8/L-15/L-16 profile panels, but Woodvents cuts a deeper, wider-pitched groove built to read across a full-height wall, while Groove in Wood is a tighter, shallower reed closer to traditional beadboard — better suited to shutters and headboards seen up close.
A flat 1.5 mm sheet in the same finish family as the Snazzy and Trendy louvres, used to fill in flat wall sections between fluted panels so a room reads as one material at different depths rather than a patchwork.
Both. Most clients take supply plus installation through our applicators so material and workmanship stay with one party. Supply-only is available if your carpenter or contractor is already appointed.
Stock profiles ship within 3–7 working days within Kolkata. Custom colours and larger production runs carry a 2–4 week lead time. You'll get an accurate date in writing before the order is released.
There's no hard minimum — a single feature wall, partition or skirting run is viable. Custom colour batches on any profile do carry a practical minimum, and we'll flag that upfront.
Yes. Visit the Experience Centre at 13C Paul Mansions, 6 Bishop Lefroy Road, Mon–Sat 10:30 AM to 7 PM, to see full panels and profiles mounted. Call ahead so we can set aside time for you.
Enquiry
A photo, a drawing or a rough area is enough to start. We'll come back with material options, an indicative rate and samples.
